How to fix the Runtime Code 2111 The changes you made can't be saved

Symptoms of Code 2111 - The changes you made can't be saved

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The changes you made can't be saved - Code 2111

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2111 (Die von Ihnen vorgenommenen Änderungen können nicht gespeichert werden) - Die von Ihnen vorgenommenen Änderungen können nicht gespeichert werden.@Der Speichervorgang ist möglicherweise aufgrund der vorübergehenden Sperrung der Datensätze durch einen anderen Benutzer fehlgeschlagen.* Klicken Sie auf OK, um es erneut zu versuchen. Möglicherweise müssen Sie mehrmals auf OK klicken (oder warten, bis der andere Benutzer die Tabelle schließt).* Klicken Sie auf Kann
Come fissare Errore 2111 (Le modifiche apportate non possono essere salvate) - Le modifiche apportate non possono essere salvate.@L'operazione di salvataggio potrebbe non essere riuscita a causa del blocco temporaneo dei record da parte di un altro utente.* Fare clic su OK per riprovare. Potrebbe essere necessario fare clic su OK più volte (o attendere che l'altro utente chiuda la tabella).* Fare clic su Can
Hoe maak je Fout 2111 (De wijzigingen die je hebt aangebracht, kunnen niet worden opgeslagen) - De wijzigingen die u heeft aangebracht, kunnen niet worden opgeslagen.@Het opslaan is mogelijk mislukt omdat de records door een andere gebruiker tijdelijk zijn vergrendeld.* Klik op OK om het opnieuw te proberen. Mogelijk moet u meerdere keren op OK klikken (of wachten tot de andere gebruiker de tabel sluit).* Klik op Can
Comment réparer Erreur 2111 (Les modifications que vous avez apportées ne peuvent pas être enregistrées) - Les modifications que vous avez apportées ne peuvent pas être enregistrées.@L'opération d'enregistrement a peut-être échoué en raison du verrouillage temporaire des enregistrements par un autre utilisateur.* Cliquez sur OK pour réessayer. Vous devrez peut-être cliquer plusieurs fois sur OK (ou attendre que l'autre utilisateur ferme la table).* Cliquez sur Peut
어떻게 고치는 지 오류 2111 (변경 사항을 저장할 수 없습니다) - 변경 사항을 저장할 수 없습니다.@다른 사용자가 레코드를 임시로 잠그기 때문에 저장 작업이 실패했을 수 있습니다.* 다시 시도하려면 확인을 클릭하세요. 확인을 여러 번 클릭해야 할 수도 있습니다(또는 다른 사용자가 테이블을 닫을 때까지 기다려야 함).* 클릭 가능
Como corrigir o Erro 2111 (As alterações que você fez não podem ser salvas) - As alterações feitas não podem ser salvas. @ A operação de salvamento pode ter falhado devido ao bloqueio temporário dos registros por outro usuário. * Clique em OK para tentar novamente. Pode ser necessário clicar em OK várias vezes (ou esperar até que o outro usuário feche a mesa). * Clique em Pode
Hur man åtgärdar Fel 2111 (Ändringarna du gjorde kan inte sparas) - Ändringarna som du har gjort kan inte sparas.@Spara -åtgärden kan ha misslyckats på grund av tillfällig låsning av poster av en annan användare.* Klicka på OK för att försöka igen. Du kan behöva klicka OK flera gånger (eller vänta tills den andra användaren stänger tabellen).* Klicka på Kan
Как исправить Ошибка 2111 (Внесенные вами изменения не могут быть сохранены) - Внесенные вами изменения не могут быть сохранены. @ Операция сохранения могла быть неудачной из-за временной блокировки записей другим пользователем. * Нажмите OK, чтобы повторить попытку. Возможно, вам придется нажать OK несколько раз (или подождать, пока другой пользователь закроет таблицу). * Нажмите Can
Jak naprawić Błąd 2111 (Wprowadzonych zmian nie można zapisać) - Wprowadzone zmiany nie mogą zostać zapisane.@Operacja zapisywania mogła się nie powieść z powodu tymczasowego zablokowania rekordów przez innego użytkownika.* Kliknij OK, aby spróbować ponownie. Może być konieczne kilkukrotne kliknięcie OK (lub poczekanie, aż inny użytkownik zamknie stół).* Kliknij opcję Can
Cómo arreglar Error 2111 (Los cambios que hiciste no se pueden guardar) - Los cambios que realizó no se pueden guardar. @ Es posible que la operación de guardar haya fallado debido al bloqueo temporal de los registros por parte de otro usuario. * Haga clic en Aceptar para volver a intentarlo. Es posible que deba hacer clic en Aceptar varias veces (o esperar hasta que el otro usuario cierre la tabla). * Haga clic en Puede

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: