How to fix the Runtime Code 9508 Microsoft Office Access couldn't close database '|

Symptoms of Code 9508 - Microsoft Office Access couldn't close database '|

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Office Access couldn't close database '| - Code 9508

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 4 - Re-install Runtime Libraries

up vote 1 down vote accepted

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 9508 (Microsoft Office Access konnte die Datenbank nicht schließen '|) - Microsoft Office Access konnte die Datenbank '|.' nicht schließen.@Ihre letzte Änderung wurde möglicherweise nicht gespeichert, da ein interner Puffer von einem anderen Benutzer (dessen Name in der vorherigen Nachricht angegeben wurde) gesperrt wurde.Um Datenverlust zu vermeiden, warten Sie auf den anderen Benutzer, um die Verwendung zu beenden
Come fissare Errore 9508 (Microsoft Office Access non è riuscito a chiudere il database '|) - Microsoft Office Access non è riuscito a chiudere il database '|.'@L'ultima modifica potrebbe non essere stata salvata perché un buffer interno è stato bloccato da un altro utente (il cui nome è stato fornito nel messaggio precedente). Per evitare di perdere dati, attendere l'altro utente per terminare l'uso
Hoe maak je Fout 9508 (Microsoft Office Access kan de database '| . niet sluiten) - Microsoft Office Access kan database '|.' niet sluiten.@Uw laatste wijziging is mogelijk niet opgeslagen omdat een interne buffer is vergrendeld door een andere gebruiker (wiens naam in het vorige bericht is opgegeven). Wacht op de andere om gegevensverlies te voorkomen gebruiker om usin te beëindigen
Comment réparer Erreur 9508 (Microsoft Office Access n'a pas pu fermer la base de données '|) - Microsoft Office Access n'a pas pu fermer la base de données '|.'@Votre dernière modification n'a peut-être pas été enregistrée car un tampon interne a été verrouillé par un autre utilisateur (dont le nom a été donné dans le message précédent).Pour éviter de perdre des données, attendez l'autre utilisateur pour terminer l'utilisation
어떻게 고치는 지 오류 9508 (Microsoft Office Access에서 데이터베이스를 닫을 수 없습니다. '|) - Microsoft Office Access에서 '| 사용자가 사용을 완료하려면
Como corrigir o Erro 9508 (O Microsoft Office Access não conseguiu fechar o banco de dados '|) - O Microsoft Office Access não conseguiu fechar o banco de dados'|.'@ Sua última alteração pode não ter sido salva porque um buffer interno foi bloqueado por outro usuário (cujo nome foi fornecido na mensagem anterior). Para evitar a perda de dados, aguarde o outro usuário para terminar de usar
Hur man åtgärdar Fel 9508 (Microsoft Office Access kunde inte stänga databasen '|) - Microsoft Office Access kunde inte stänga databasen'|.'@Din senaste ändring kanske inte har sparats eftersom en intern buffert var låst av en annan användare (vars namn angavs i föregående meddelande). För att undvika att förlora data, vänta på den andra användaren slutför usin
Как исправить Ошибка 9508 (Microsoft Office Access не смог закрыть базу данных »|) - Microsoft Office Access не может закрыть базу данных'|.'@ Возможно, ваше последнее изменение не было сохранено, потому что внутренний буфер был заблокирован другим пользователем (имя которого было указано в предыдущем сообщении). Чтобы избежать потери данных, дождитесь другого пользователя. пользователь, чтобы закончить usin
Jak naprawić Błąd 9508 (Program Microsoft Office Access nie mógł zamknąć bazy danych „|) - Microsoft Office Access nie mógł zamknąć bazy danych '|.'@Twoja ostatnia zmiana mogła nie zostać zapisana, ponieważ bufor wewnętrzny został zablokowany przez innego użytkownika (którego nazwa została podana w poprzedniej wiadomości). Aby uniknąć utraty danych, poczekaj na drugi użytkownik, aby zakończyć korzystanie
Cómo arreglar Error 9508 (Microsoft Office Access no pudo cerrar la base de datos '|) - Microsoft Office Access no pudo cerrar la base de datos'|.'@ Es posible que su último cambio no se haya guardado porque otro usuario bloqueó un búfer interno (cuyo nombre se proporcionó en el mensaje anterior) .Para evitar perder datos, espere a que el otro usuario para terminar usin

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: