How to fix the Runtime Code 9505 Microsoft Access Error 9505

Symptoms of Code 9505 - Microsoft Access Error 9505

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Access Error 9505 - Code 9505

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 9505 (Microsoft Access-Fehler 9505) - Microsoft Office Access hat festgestellt, dass sich diese Datenbank in einem inkonsistenten Zustand befindet, und versucht, die Datenbank wiederherzustellen. Während dieses Vorgangs wird eine Sicherungskopie der Datenbank erstellt und alle wiederhergestellten Objekte werden in einer neuen Datenbank abgelegt. Zugang
Come fissare Errore 9505 (Errore di Microsoft Access 9505) - Microsoft Office Access ha rilevato che questo database è in uno stato incoerente e tenterà di ripristinare il database. Durante questo processo, verrà eseguita una copia di backup del database e tutti gli oggetti recuperati verranno inseriti in un nuovo database. Acce
Hoe maak je Fout 9505 (Microsoft Access-fout 9505) - Microsoft Office Access heeft gedetecteerd dat deze database zich in een inconsistente staat bevindt en zal proberen de database te herstellen. Tijdens dit proces wordt een reservekopie van de database gemaakt en worden alle herstelde objecten in een nieuwe database geplaatst. Toegang
Comment réparer Erreur 9505 (Erreur Microsoft Access 9505) - Microsoft Office Access a détecté que cette base de données est dans un état incohérent et tentera de récupérer la base de données. Au cours de ce processus, une copie de sauvegarde de la base de données sera effectuée et tous les objets récupérés seront placés dans une nouvelle base de données. Accès
어떻게 고치는 지 오류 9505 (마이크로소프트 액세스 오류 9505) - Microsoft Office Access에서 이 데이터베이스가 일관성이 없는 상태임을 감지했으며 데이터베이스 복구를 시도합니다. 이 프로세스 동안 데이터베이스의 백업 복사본이 만들어지고 복구된 모든 개체가 새 데이터베이스에 배치됩니다. 액세스
Como corrigir o Erro 9505 (Erro 9505 do Microsoft Access) - O Microsoft Office Access detectou que este banco de dados está em um estado inconsistente e tentará recuperá-lo. Durante este processo, será feita uma cópia de backup do banco de dados e todos os objetos recuperados serão colocados em um novo banco de dados. Acce
Hur man åtgärdar Fel 9505 (Microsoft Access-fel 9505) - Microsoft Office Access har upptäckt att denna databas befinner sig i ett inkonsekvent tillstånd och kommer att försöka återställa databasen. Under denna process kommer en säkerhetskopia av databasen att göras och alla återställda objekt placeras i en ny databas. Acce
Как исправить Ошибка 9505 (Ошибка Microsoft Access 9505) - Microsoft Office Access обнаружил, что эта база данных находится в несогласованном состоянии, и попытается восстановить базу данных. Во время этого процесса будет сделана резервная копия базы данных, и все восстановленные объекты будут помещены в новую базу данных. Acce
Jak naprawić Błąd 9505 (Błąd Microsoft Access 9505) - Program Microsoft Office Access wykrył, że ta baza danych jest niespójna, i podejmie próbę jej odzyskania. W trakcie tego procesu zostanie wykonana kopia zapasowa bazy danych, a wszystkie odzyskane obiekty zostaną umieszczone w nowej bazie danych. Dostęp
Cómo arreglar Error 9505 (Error de Microsoft Access 9505) - Microsoft Office Access ha detectado que esta base de datos está en un estado incoherente e intentará recuperar la base de datos. Durante este proceso, se realizará una copia de seguridad de la base de datos y todos los objetos recuperados se colocarán en una nueva base de datos. Acce

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: