How to fix the Runtime Code 8086 An error occured trying to add one or more references from the source code control project

Symptoms of Code 8086 - An error occured trying to add one or more references from the source code control project

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of An error occured trying to add one or more references from the source code control project - Code 8086

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 6 - Reinstall Your Graphics Driver

up vote 1 down vote accepted

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 8086 (Beim Versuch, eine oder mehrere Referenzen aus dem Quellcodeverwaltungsprojekt hinzuzufügen, ist ein Fehler aufgetreten) - Beim Versuch, einen oder mehrere Verweise aus dem Quellcodeverwaltungsprojekt hinzuzufügen, ist ein Fehler aufgetreten.@Die Bibliothek ist möglicherweise nicht auf Ihrem Computer registriert. Überprüfen Sie Ihre Projektreferenzen und fügen Sie fehlende Referenzen hinzu, nachdem Sie die fehlenden Komponenten registriert haben, die dies
Come fissare Errore 8086 (Si è verificato un errore durante il tentativo di aggiungere uno o più riferimenti dal progetto di controllo del codice sorgente) - Si è verificato un errore durante il tentativo di aggiungere uno o più riferimenti dal progetto di controllo del codice sorgente.@La libreria potrebbe non essere registrata sul tuo computer. Controlla i riferimenti del tuo progetto e aggiungi eventuali riferimenti mancanti dopo aver registrato i componenti mancanti che questo
Hoe maak je Fout 8086 (Er is een fout opgetreden bij het toevoegen van een of meer referenties van het broncodebeheerproject) - Er is een fout opgetreden bij het toevoegen van een of meer referenties van het broncodebeheerproject.@De bibliotheek is mogelijk niet geregistreerd op uw computer. Controleer uw projectreferenties en voeg eventuele ontbrekende referenties toe na het registreren van de ontbrekende componenten die dit
Comment réparer Erreur 8086 (Une erreur s'est produite lors de la tentative d'ajout d'une ou plusieurs références à partir du projet de contrôle de code source) - Une erreur s'est produite lors de la tentative d'ajout d'une ou plusieurs références à partir du projet de contrôle de code source.@La bibliothèque n'est peut-être pas enregistrée sur votre ordinateur. Vérifiez les références de votre projet et ajoutez les références manquantes après avoir enregistré les composants manquants que cela
어떻게 고치는 지 오류 8086 (소스 코드 제어 프로젝트에서 하나 이상의 참조를 추가하는 동안 오류가 발생했습니다.) - 소스 코드 제어 프로젝트에서 하나 이상의 참조를 추가하는 동안 오류가 발생했습니다.@라이브러리가 컴퓨터에 등록되지 않았을 수 있습니다. 누락된 구성 요소를 등록한 후 프로젝트 참조를 확인하고 누락된 참조를 추가하십시오.
Como corrigir o Erro 8086 (Ocorreu um erro ao tentar adicionar uma ou mais referências do projeto de controle do código-fonte) - Ocorreu um erro ao tentar adicionar uma ou mais referências do projeto de controle do código-fonte. @ A biblioteca pode não estar registrada em seu computador. Verifique as referências do seu projeto e adicione quaisquer referências ausentes após registrar os componentes ausentes que este
Hur man åtgärdar Fel 8086 (Ett fel uppstod vid försök att lägga till en eller flera referenser från källkodskontrollprojektet) - Ett fel uppstod vid försök att lägga till en eller flera referenser från källkodkontrollprojektet.@Biblioteket kanske inte är registrerat på din dator. Kontrollera dina projektreferenser och lägg till eventuella saknade referenser efter att du har registrerat de saknade komponenterna
Как исправить Ошибка 8086 (Произошла ошибка при попытке добавить одну или несколько ссылок из проекта управления исходным кодом.) - Произошла ошибка при добавлении одной или нескольких ссылок из проекта управления исходным кодом. @ Возможно, библиотека не зарегистрирована на вашем компьютере. Проверьте ссылки на свой проект и добавьте недостающие ссылки после регистрации недостающих компонентов, которые
Jak naprawić Błąd 8086 (Wystąpił błąd podczas próby dodania jednego lub więcej odwołań z projektu kontroli kodu źródłowego) - Wystąpił błąd podczas próby dodania jednego lub więcej odniesień z projektu kontroli kodu źródłowego.@Biblioteka może nie być zarejestrowana na twoim komputerze. Sprawdź referencje projektu i dodaj brakujące referencje po zarejestrowaniu brakujących komponentów, które to
Cómo arreglar Error 8086 (Se produjo un error al intentar agregar una o más referencias del proyecto de control de código fuente) - Se produjo un error al intentar agregar una o más referencias del proyecto de control de código fuente. @ Es posible que la biblioteca no esté registrada en su computadora. Verifique las referencias de su proyecto y agregue las referencias faltantes después de registrar los componentes faltantes que este

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: