How to fix the Runtime Code 3716 TLV violation

Symptoms of Code 3716 - TLV violation

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of TLV violation - Code 3716

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 3716 (TLV-Verstoß) - TLV-Verletzung. Dieser Datensatz enthält einen Feldwert, der die Validierungsbeschränkung auf Tabellenebene nicht erfüllt. Aktualisieren Sie entweder den Feldwert, der gegen die Validierungsregel verstößt, und übermitteln Sie diesen Konfliktdatensatz erneut, oder löschen Sie diesen Konfliktdatensatz.
Come fissare Errore 3716 (Violazione del TLV) - Violazione del TLV. Questo record contiene un valore di campo che non soddisfa il vincolo di convalida a livello di tabella. Aggiorna il valore del campo che sta violando la regola di convalida e quindi invia nuovamente questo record di conflitto oppure elimina questo record di conflitto.
Hoe maak je Fout 3716 (TLV-schending) - TLV-overtreding. Deze record bevat een veldwaarde die niet voldoet aan de validatiebeperking op tabelniveau. Werk de veldwaarde bij die de validatieregel schendt en dien vervolgens deze conflictrecord opnieuw in, of verwijder deze conflictrecord.
Comment réparer Erreur 3716 (Violation de la TLV) - Violation de la TLV. Cet enregistrement contient une valeur de champ qui ne respecte pas la contrainte de validation au niveau de la table. Mettez à jour la valeur du champ qui enfreint la règle de validation, puis soumettez à nouveau cet enregistrement de conflit, ou supprimez cet enregistrement de conflit.
어떻게 고치는 지 오류 3716 (TLV 위반) - TLV 위반. 이 레코드에는 테이블 수준 유효성 검사 제약 조건을 충족하지 않는 필드 값이 있습니다. 유효성 검사 규칙을 위반하는 필드 값을 업데이트한 다음 이 충돌 레코드를 다시 제출하거나 이 충돌 레코드를 삭제하십시오.
Como corrigir o Erro 3716 (Violação TLV) - Violação de TLV. Este registro contém um valor de campo que não atende à restrição de validação de nível de tabela. Atualize o valor do campo que está violando a regra de validação e, em seguida, reenvie este registro de conflito ou exclua este registro de conflito.
Hur man åtgärdar Fel 3716 (TLV-överträdelse) - TLV -överträdelse. Den här posten innehåller ett fältvärde som inte uppfyller begränsningsgränsen för tabellnivå. Antingen uppdatera fältvärdet som bryter mot valideringsregeln och skicka sedan in konfliktposten igen, eller ta bort denna konfliktpost.
Как исправить Ошибка 3716 (Нарушение TLV) - Нарушение TLV. Эта запись содержит значение поля, которое не соответствует ограничению проверки на уровне таблицы. Либо обновите значение поля, которое нарушает правило проверки, а затем повторно отправьте эту запись конфликта, либо удалите эту запись конфликта.
Jak naprawić Błąd 3716 (Naruszenie TLV) - Naruszenie TLV. Ten rekord zawiera wartość pola, która nie spełnia ograniczenia walidacji na poziomie tabeli. Zaktualizuj wartość pola, która narusza regułę sprawdzania poprawności, a następnie ponownie prześlij ten rekord konfliktu lub usuń ten rekord konfliktu.
Cómo arreglar Error de 3716 (Violación de TLV) - Violación de TLV. Este registro contiene un valor de campo que no cumple con la restricción de validación de nivel de tabla. Actualice el valor del campo que infringe la regla de validación y luego vuelva a enviar este registro de conflicto o elimine este registro de conflicto.

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: