How to fix the Runtime Code 2764 The object's property or method can't be set

Symptoms of Code 2764 - The object's property or method can't be set

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The object's property or method can't be set - Code 2764

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2764 (Die Eigenschaft oder Methode des Objekts kann nicht festgelegt werden) - Die Eigenschaft oder Methode des Objekts kann nicht festgelegt werden.@Sie haben versucht, eine Visual Basic-Prozedur auszuführen, um eine Eigenschaft festzulegen oder eine Methode für ein Objekt anzuwenden. Die Eigenschaft oder Methode unterstützt jedoch keine benannten Argumente.@Weitere Informationen finden Sie in der Dokumentation der Komponente.
Come fissare Errore 2764 (La proprietà o il metodo dell'oggetto non può essere impostato) - Impossibile impostare la proprietà o il metodo dell'oggetto.@Si è tentato di eseguire una procedura Visual Basic per impostare una proprietà o applicare un metodo per un oggetto. Tuttavia, la proprietà o il metodo non supporta gli argomenti denominati.@Controlla la documentazione del componente per informazioni
Hoe maak je Fout 2764 (De eigenschap of methode van het object kan niet worden ingesteld) - De eigenschap of methode van het object kan niet worden ingesteld.@U hebt geprobeerd een Visual Basic-procedure uit te voeren om een ​​eigenschap in te stellen of een methode voor een object toe te passen. De eigenschap of methode ondersteunt echter geen benoemde argumenten.@Controleer de documentatie van de component voor informatie
Comment réparer Erreur 2764 (La propriété ou la méthode de l'objet ne peut pas être définie) - Impossible de définir la propriété ou la méthode de l'objet.@Vous avez essayé d'exécuter une procédure Visual Basic pour définir une propriété ou appliquer une méthode à un objet. Cependant, la propriété ou la méthode ne prend pas en charge les arguments nommés.@Consultez la documentation du composant pour plus d'informations
어떻게 고치는 지 오류 2764 (개체의 속성 또는 메서드를 설정할 수 없습니다.) - 개체의 속성이나 메서드를 설정할 수 없습니다.@Visual Basic 프로시저를 실행하여 속성을 설정하거나 개체에 메서드를 적용하려고 했습니다. 그러나 속성 또는 메서드는 명명된 인수를 지원하지 않습니다.@자세한 내용은 구성 요소 설명서를 확인하세요.
Como corrigir o Erro 2764 (A propriedade ou método do objeto não pode ser definido) - A propriedade ou método do objeto não pode ser definido. @ Você tentou executar um procedimento do Visual Basic para definir uma propriedade ou aplicar um método a um objeto. No entanto, a propriedade ou método não suporta argumentos nomeados. @ Verifique a documentação do componente para obter informações
Hur man åtgärdar Fel 2764 (Objektets egenskap eller metod kan inte ställas in) - Objektets egenskap eller metod kan inte ställas in.@Du försökte köra en Visual Basic -procedur för att ställa in en egenskap eller tillämpa en metod för ett objekt. Egenskapen eller metoden stöder dock inte namngivna argument.@Kontrollera komponentens dokumentation för information
Как исправить Ошибка 2764 (Невозможно установить свойство или метод объекта.) - Невозможно установить свойство или метод объекта. @ Вы попытались запустить процедуру Visual Basic, чтобы установить свойство или применить метод для объекта. Однако свойство или метод не поддерживает именованные аргументы. @ Информацию о компонентах см. В документации.
Jak naprawić Błąd 2764 (Nie można ustawić właściwości lub metody obiektu) - Nie można ustawić właściwości lub metody obiektu.@Próbowałeś uruchomić procedurę Visual Basic, aby ustawić właściwość lub zastosować metodę dla obiektu. Jednak właściwość lub metoda nie obsługuje nazwanych argumentów.@Sprawdź dokumentację komponentu, aby uzyskać informacje
Cómo arreglar Error 2764 (No se puede establecer la propiedad o el método del objeto) - No se puede establecer la propiedad o el método del objeto. @ Intentó ejecutar un procedimiento de Visual Basic para establecer una propiedad o aplicar un método para un objeto. Sin embargo, la propiedad o el método no admite argumentos con nombre. @ Consulte la documentación del componente para obtener información

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: