How to fix the Runtime Code 2510 The expression you entered in the Specification Name argument exceeds the 64-character limit

Symptoms of Code 2510 - The expression you entered in the Specification Name argument exceeds the 64-character limit

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The expression you entered in the Specification Name argument exceeds the 64-character limit - Code 2510

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2510 (Der Ausdruck, den Sie im Argument Spezifikationsname eingegeben haben, überschreitet die Grenze von 64 Zeichen) - Der im Argument Spezifikationsname eingegebene Ausdruck überschreitet die Grenze von 64 Zeichen.@Wählen Sie einen der vorhandenen Spezifikationsnamen aus dem Argumentlistenfeld aus, wenn Sie die TransferText-Aktion in einem Makro verwenden, oder geben Sie in Visual Basic einen Namen ein, der f
Come fissare Errore 2510 (L'espressione immessa nell'argomento Nome specifica supera il limite di 64 caratteri) - L'espressione immessa nell'argomento Nome specifica supera il limite di 64 caratteri.@Selezionare uno dei nomi di specifica esistenti dalla casella di riepilogo degli argomenti quando si utilizza l'azione Trasferisci testo in una macro oppure immettere un nome in Visual Basic che f
Hoe maak je Fout 2510 (De uitdrukking die u hebt ingevoerd in het argument Specificatienaam overschrijdt de limiet van 64 tekens) - De uitdrukking die u in het argument Specificatienaam hebt ingevoerd, overschrijdt de limiet van 64 tekens.
Comment réparer Erreur 2510 (L'expression que vous avez saisie dans l'argument Nom de la spécification dépasse la limite de 64 caractères) - L'expression que vous avez entrée dans l'argument Nom de la spécification dépasse la limite de 64 caractères.@Sélectionnez l'un des noms de spécification existants dans la zone de liste d'arguments lorsque vous utilisez l'action TransférerTexte dans une macro, ou entrez un nom dans Visual Basic qui f
어떻게 고치는 지 오류 2510 (사양 이름 인수에 입력한 표현식이 64자 제한을 초과합니다.) - 사양 이름 인수에 입력한 식은 64자 제한을 초과합니다.@매크로에서 TransferText 작업을 사용할 때 인수 목록 상자에서 기존 사양 이름 중 하나를 선택하거나 Visual Basic에서 f
Como corrigir o Erro 2510 (A expressão que você inseriu no argumento Nome da Especificação excede o limite de 64 caracteres) - A expressão inserida no argumento Nome da Especificação excede o limite de 64 caracteres. @ Selecione um dos nomes de especificação existentes na caixa de listagem de argumentos ao usar a ação TransferirTexto em uma macro ou insira um nome no Visual Basic que f
Hur man åtgärdar Fel 2510 (Uttrycket du angav i argumentet Specification Name överskrider gränsen på 64 tecken) - Uttrycket du angav i argumentet Specification Name överskrider gränsen för 64 tecken.@Välj ett av de befintliga specifikationsnamnen i argumentlistan när du använder åtgärden TransferText i ett makro eller anger ett namn i Visual Basic som f
Как исправить Ошибка 2510 (Выражение, введенное вами в аргументе "Имя спецификации", превышает лимит в 64 символа.) - Выражение, введенное вами в аргументе «Имя спецификации», превышает предел в 64 символа. @ Выберите одно из существующих имен спецификаций в поле со списком аргументов, когда вы используете действие TransferText в макросе, или введите имя в Visual Basic, которое f
Jak naprawić Błąd 2510 (Wyrażenie wprowadzone w argumencie Nazwa specyfikacji przekracza limit 64 znaków) - Wyrażenie wprowadzone w argumencie Nazwa specyfikacji przekracza limit 64 znaków.@Wybierz jedną z istniejących nazw specyfikacji z pola listy argumentów podczas korzystania z akcji Przenieś tekst w makrze lub wprowadź nazwę w języku Visual Basic, która f
Cómo arreglar Error 2510 (La expresión que ingresó en el argumento Nombre de la especificación excede el límite de 64 caracteres) - La expresión que ingresó en el argumento Nombre de especificación excede el límite de 64 caracteres. @ Seleccione uno de los nombres de especificación existentes del cuadro de lista de argumentos cuando use la acción Transferir texto en una macro, o ingrese un nombre en Visual Basic que f

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: