How to fix the Runtime Code 2492 Microsoft Office Access can't find the macro '|2' in the macro group '|1

Symptoms of Code 2492 - Microsoft Office Access can't find the macro '|2' in the macro group '|1

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Office Access can't find the macro '|2' in the macro group '|1 - Code 2492

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2492 (Microsoft Office Access kann das Makro '|2' in der Makrogruppe '|1 . nicht finden) - Microsoft Office Access kann das Makro '|2' in der Makrogruppe '|1' nicht finden.@Sie haben die Syntax macrogroupname.macroname verwendet, um ein Makro anzugeben. Sie haben dann versucht, das Makro (direkt oder indirekt) auszuführen, oder Sie haben die RunMacro-Methode verwendet, um das Makro auszuführen. jedoch
Come fissare Errore 2492 (Microsoft Office Access non riesce a trovare la macro '|2' nel gruppo di macro '|1) - Microsoft Office Access non riesce a trovare la macro '|2' nel gruppo di macro '|1.'@Hai utilizzato la sintassi nomegruppomacro.nomemacro per specificare una macro. Si è quindi tentato di eseguire la macro (direttamente o indirettamente) oppure è stato utilizzato il metodo RunMacro per eseguire la macro. però
Hoe maak je Fout 2492 (Microsoft Office Access kan de macro '|2' niet vinden in de macrogroep '|1) - Microsoft Office Access kan de macro '|2' niet vinden in de macrogroep '|1.'@U hebt de syntaxis macrogroepnaam.macronaam gebruikt om een ​​macro op te geven. U hebt vervolgens geprobeerd de macro uit te voeren (direct of indirect), of u hebt de methode RunMacro gebruikt om de macro uit te voeren. echter
Comment réparer Erreur 2492 (Microsoft Office Access ne trouve pas la macro « |2 » dans le groupe de macros « |1) - Microsoft Office Access ne trouve pas la macro '|2' dans le groupe de macros '|1.'@Vous avez utilisé la syntaxe macrogroupname.macroname pour spécifier une macro. Vous avez ensuite essayé d'exécuter la macro (directement ou indirectement) ou vous avez utilisé la méthode RunMacro pour exécuter la macro. toutefois
어떻게 고치는 지 오류 2492 (Microsoft Office Access에서 매크로 그룹 '|1'에서 매크로 '|2'를 찾을 수 없습니다.) - Microsoft Office Access에서 매크로 그룹 '|1'에서 매크로 '|2'를 찾을 수 없습니다. @ 매크로를 지정하기 위해 macrogroupname.macroname 구문을 사용했습니다. 그런 다음 매크로를 직접 또는 간접적으로 실행하려고 하거나 RunMacro 메서드를 사용하여 매크로를 실행했습니다. 하지만
Como corrigir o Erro 2492 (O Microsoft Office Access não consegue encontrar a macro '| 2' no grupo de macros '| 1) - O Microsoft Office Access não consegue encontrar a macro '| 2' no grupo de macros'|1.'@ Você usou a sintaxe macrogroupname.macroname para especificar uma macro. Em seguida, você tentou executar a macro (direta ou indiretamente) ou usou o método RunMacro para executar a macro. Contudo
Hur man åtgärdar Fel 2492 (Microsoft Office Access kan inte hitta makrot '|2' i makrogruppen '|1) - Microsoft Office Access kan inte hitta makrot '| 2' i makrogruppen'|1.'@Du använde syntaxen makrogruppnamn.makronamn för att ange ett makro. Du försökte sedan köra makrot (direkt eller indirekt), eller så använde du RunMacro -metoden för att köra makrot. dock
Как исправить Ошибка 2492 (Microsoft Office Access не может найти макрос "| 2" в группе макросов "| 1") - Microsoft Office Access не может найти макрос '| 2' в группе макросов'|1.'@ Вы использовали синтаксис macrogroupname.macroname для указания макроса. Затем вы попытались запустить макрос (прямо или косвенно) или использовали метод RunMacro для запуска макроса. тем не мение
Jak naprawić Błąd 2492 (Program Microsoft Office Access nie może znaleźć makra „|2” w grupie makr „|1) - Program Microsoft Office Access nie może znaleźć makra „|2” w grupie makr „|1”.@Do określenia makra użyto składni nazwagrupymakro.nazwamakro. Następnie próbowałeś uruchomić makro (bezpośrednio lub pośrednio) lub użyłeś metody RunMacro do uruchomienia makra. Jednakże
Cómo arreglar Error 2492 (Microsoft Office Access no puede encontrar la macro '| 2' en el grupo de macros '| 1) - Microsoft Office Access no puede encontrar la macro '| 2' en el grupo de macros'|1.'@ Usó la sintaxis macrogroupname.macroname para especificar una macro. Luego intentó ejecutar la macro (directa o indirectamente), o utilizó el método RunMacro para ejecutar la macro. Sin embargo

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: