How to fix the Runtime Code 2260 An error occurred while sending data to the OLE server

Symptoms of Code 2260 - An error occurred while sending data to the OLE server

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of An error occurred while sending data to the OLE server - Code 2260

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2260 (Beim Senden von Daten an den OLE-Server ist ein Fehler aufgetreten) - Beim Senden von Daten an den OLE-Server (die Anwendung, die zum Erstellen des Objekts verwendet wurde) ist ein Fehler aufgetreten.@* Möglicherweise haben Sie versucht, zu viele Daten zu senden. Wenn Sie ein Diagramm erstellen und das Diagramm auf einer Abfrage basiert, ändern Sie die Abfrage, sodass weniger Daten ausgewählt werden. Wenn
Come fissare Errore 2260 (Si è verificato un errore durante l'invio dei dati al server OLE) - Si è verificato un errore durante l'invio dei dati al server OLE (l'applicazione utilizzata per creare l'oggetto).@* Potresti aver tentato di inviare troppi dati. Se stai creando un grafico e il grafico è basato su una query, modifica la query in modo che selezioni meno dati. Se
Hoe maak je Fout 2260 (Er is een fout opgetreden bij het verzenden van gegevens naar de OLE-server) - Er is een fout opgetreden bij het verzenden van gegevens naar de OLE-server (de toepassing die is gebruikt om het object te maken).@* U hebt mogelijk geprobeerd te veel gegevens te verzenden. Als u een diagram maakt en het diagram is gebaseerd op een query, wijzigt u de query zodat deze minder gegevens selecteert. Indien
Comment réparer Erreur 2260 (Une erreur s'est produite lors de l'envoi de données au serveur OLE) - Une erreur s'est produite lors de l'envoi de données au serveur OLE (l'application utilisée pour créer l'objet).@* Vous avez peut-être essayé d'envoyer trop de données. Si vous créez un graphique et que le graphique est basé sur une requête, modifiez la requête afin qu'elle sélectionne moins de données. Si
어떻게 고치는 지 오류 2260 (OLE 서버로 데이터를 보내는 동안 오류가 발생했습니다.) - OLE 서버(개체를 만드는 데 사용된 응용 프로그램)로 데이터를 보내는 동안 오류가 발생했습니다.@* 너무 많은 데이터를 보내려고 시도했을 수 있습니다. 차트를 만들고 차트가 쿼리를 기반으로 하는 경우 쿼리를 수정하여 데이터를 적게 선택합니다. 만약에
Como corrigir o Erro 2260 (Ocorreu um erro ao enviar dados para o servidor OLE) - Ocorreu um erro ao enviar dados para o servidor OLE (o aplicativo usado para criar o objeto). @ * Você pode ter tentado enviar muitos dados. Se você estiver criando um gráfico e o gráfico for baseado em uma consulta, modifique a consulta para que selecione menos dados. Se
Hur man åtgärdar Fel 2260 (Ett fel uppstod när data skickades till OLE-servern) - Ett fel uppstod när data skickades till OLE -servern (applikationen som användes för att skapa objektet).@* Du kan ha försökt skicka för mycket data. Om du skapar ett diagram och diagrammet är baserat på en fråga, ändra frågan så att den väljer mindre data. Om
Как исправить Ошибка 2260 (Произошла ошибка при отправке данных на OLE-сервер) - Произошла ошибка при отправке данных на сервер OLE (приложение, использованное для создания объекта). @ * Возможно, вы пытались отправить слишком много данных. Если вы создаете диаграмму, и диаграмма основана на запросе, измените запрос, чтобы он выбирал меньше данных. Если
Jak naprawić Błąd 2260 (Wystąpił błąd podczas wysyłania danych do serwera OLE) - Wystąpił błąd podczas wysyłania danych do serwera OLE (aplikacja użyta do utworzenia obiektu).@* Być może próbowałeś wysłać zbyt dużo danych. Jeśli tworzysz wykres, który jest oparty na zapytaniu, zmodyfikuj zapytanie tak, aby wybierało mniej danych. Gdyby
Cómo arreglar Error 2260 (Se produjo un error al enviar datos al servidor OLE) - Se produjo un error al enviar datos al servidor OLE (la aplicación utilizada para crear el objeto). @ * Es posible que haya intentado enviar demasiados datos. Si está creando un gráfico y el gráfico se basa en una consulta, modifique la consulta para que seleccione menos datos. Si

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: