How to fix the Runtime Code 2118 You must save the current field before you run the Requery action

Symptoms of Code 2118 - You must save the current field before you run the Requery action

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of You must save the current field before you run the Requery action - Code 2118

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2118 (Sie müssen das aktuelle Feld speichern, bevor Sie die Aktion Erneut abfragen ausführen) - Sie müssen das aktuelle Feld speichern, bevor Sie die Aktion Erneut abfragen ausführen.@* Wenn Sie ein Makro im Navigationsbereich ausführen, speichern Sie zuerst das Feld und führen Sie dann das Makro aus.* Wenn der Makroname die Einstellung der Eigenschaft BeforeUpdate in . ist eine Visual Basic-Funktion
Come fissare Errore 2118 (È necessario salvare il campo corrente prima di eseguire l'azione Richiedi) - È necessario salvare il campo corrente prima di eseguire l'azione Requery.@* Se si esegue una macro dal riquadro di spostamento, salvare prima il campo, quindi eseguire la macro.* Se il nome della macro è l'impostazione della proprietà BeforeUpdate in una funzione Visual Basic
Hoe maak je Fout 2118 (U moet het huidige veld opslaan voordat u de actie Opvragen . uitvoert) - U moet het huidige veld opslaan voordat u de actie Opvragen uitvoert.@* Als u een macro uitvoert vanuit het navigatiedeelvenster, slaat u eerst het veld op en voert u vervolgens de macro uit.* Als de macronaam de instelling is van de eigenschap BeforeUpdate in een Visual Basic-functie
Comment réparer Erreur 2118 (Vous devez enregistrer le champ actuel avant d'exécuter l'action Réinterroger) - Vous devez enregistrer le champ actuel avant d'exécuter l'action Réinterroger.@* Si vous exécutez une macro à partir du volet de navigation, enregistrez d'abord le champ, puis exécutez la macro.* Si le nom de la macro correspond au paramètre de la propriété BeforeUpdate dans une fonction Visual Basic
어떻게 고치는 지 오류 2118 (쿼리 작업을 실행하기 전에 현재 필드를 저장해야 합니다.) - Requery 작업을 실행하기 전에 현재 필드를 저장해야 합니다.@* 탐색 창에서 매크로를 실행하는 경우 먼저 필드를 저장한 다음 매크로를 실행합니다.* 매크로 이름이 에서 BeforeUpdate 속성의 설정인 경우 Visual Basic 기능
Como corrigir o Erro 2118 (Você deve salvar o campo atual antes de executar a ação Requery) - Você deve salvar o campo atual antes de executar a ação Requery. @ * Se você estiver executando uma macro do Painel de Navegação, salve o campo primeiro e, em seguida, execute a macro. * Se o nome da macro for a configuração da propriedade BeforeUpdate em uma função do Visual Basic
Hur man åtgärdar Fel 2118 (Du måste spara det aktuella fältet innan du kör åtgärden Requery) - Du måste spara det aktuella fältet innan du kör åtgärden Begäran.@* Om du kör ett makro från navigeringsfönstret, spara fältet först och kör sedan makrot.* Om makronamnet är inställningen för egenskapen BeforeUpdate i en Visual Basic -funktion
Как исправить Ошибка 2118 (Перед запуском действия Requery необходимо сохранить текущее поле.) - Перед запуском действия Requery необходимо сохранить текущее поле. @ * Если вы запускаете макрос из области навигации, сначала сохраните поле, а затем запустите макрос. * Если имя макроса является настройкой свойства BeforeUpdate в функции Visual Basic
Jak naprawić Błąd 2118 (Musisz zapisać bieżące pole przed uruchomieniem akcji Ponów zapytanie) - Przed uruchomieniem akcji Ponów zapytanie należy zapisać bieżące pole.@* Jeśli uruchamiasz makro z okienka nawigacji, najpierw zapisz pole, a następnie uruchom makro.* Jeśli nazwa makra jest ustawieniem właściwości BeforeUpdate w funkcja języka Visual Basic
Cómo arreglar Error 2118 (Debe guardar el campo actual antes de ejecutar la acción Solicitar) - Debe guardar el campo actual antes de ejecutar la acción Requery. @ * Si está ejecutando una macro desde el Panel de navegación, primero guarde el campo y luego ejecute la macro. * Si el nombre de la macro es la configuración de la propiedad BeforeUpdate en una función de Visual Basic

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: