How to fix the Runtime Code 10803 The object '|' already exists

Symptoms of Code 10803 - The object '|' already exists

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The object '|' already exists - Code 10803

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 10803 (Das Objekt '|' ist bereits vorhanden) - Das Objekt '|' ist bereits vorhanden.@Möchten Sie das vorhandene Objekt durch das zu exportierende ersetzen?Wenn Sie dieses Objekt exportieren möchten, ohne das vorhandene Objekt zu ersetzen, klicken Sie auf Nein. Sie können dann im Dialogfeld Exportieren einen neuen Namen wählen.@@ 20@@@2.
Come fissare Errore 10803 (L'oggetto '|' esiste già) - L'oggetto '|' esiste già.@Vuoi sostituire l'oggetto esistente con quello che stai esportando?Se vuoi esportare questo oggetto senza sostituire l'oggetto esistente, fai clic su No. Puoi quindi scegliere un nuovo nome nella finestra di dialogo Esporta.@@ 20@@@2.
Hoe maak je Fout 10803 (Het object '|' bestaat al) - Het object '|' bestaat al.@Wilt u het bestaande object vervangen door het object dat u exporteert? Als u dit object wilt exporteren zonder het bestaande object te vervangen, klikt u op Nee. U kunt dan een nieuwe naam kiezen in het dialoogvenster Exporteren.@@ 20@@@2.
Comment réparer Erreur 10803 (L'objet '|' existe déjà) - L'objet '|' existe déjà.@Voulez-vous remplacer l'objet existant par celui que vous exportez ?Si vous souhaitez exporter cet objet sans remplacer l'objet existant, cliquez sur Non. Vous pouvez alors choisir un nouveau nom dans la boîte de dialogue Exporter.@@ 20@@@2.
어떻게 고치는 지 오류 10803 (개체 '|' 이미 존재 함) - 개체 '|' 이미 존재합니다.@기존 개체를 내보내려는 개체로 바꾸시겠습니까?기존 개체를 바꾸지 않고 이 개체를 내보내려면 아니요를 클릭하십시오. 그런 다음 내보내기 대화 상자에서 새 이름을 선택할 수 있습니다.@@ 20@@@2.
Como corrigir o Erro 10803 (O objeto '|' já existe) - O objeto '|' já existe. @ Deseja substituir o objeto existente pelo que está exportando? Se quiser exportar este objeto sem substituir o objeto existente, clique em Não. Você pode então escolher um novo nome na caixa de diálogo Exportar. @@ 20 @@@ 2.
Hur man åtgärdar Fel 10803 (Objektet '|' existerar redan) - Objektet '|' finns redan.@Vill du ersätta det befintliga objektet med det du exporterar? Om du vill exportera det här objektet utan att ersätta det befintliga objektet klickar du på Nej. Du kan sedan välja ett nytt namn i dialogrutan Exportera. @@ 20 @@@ 2.
Как исправить Ошибка 10803 (Объект '|' уже существует) - Объект '|' уже существует. @ Хотите заменить существующий объект тем, который вы экспортируете? Если вы хотите экспортировать этот объект, не заменяя существующий, нажмите Нет. Затем вы можете выбрать новое имя в диалоговом окне Экспорт. @@ 20 @@@ 2.
Jak naprawić Błąd 10803 (Obiekt '|' już istnieje) - Obiekt '|' już istnieje.@Czy chcesz zastąpić istniejący obiekt tym, który eksportujesz?Jeśli chcesz wyeksportować ten obiekt bez zastępowania istniejącego, kliknij Nie. Następnie możesz wybrać nową nazwę w oknie dialogowym Eksportuj.@@ 20@@@2.
Cómo arreglar Error 10803 (El objeto '|' ya existe) - El objeto '|' ya existe. @ ¿Desea reemplazar el objeto existente por el que está exportando? Si desea exportar este objeto sin reemplazar el objeto existente, haga clic en No. Luego puede elegir un nuevo nombre en el cuadro de diálogo Exportar. @@ 20 @@@ 2.

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: