How to fix the Runtime Code 10607 Microsoft Access Error 10607

Symptoms of Code 10607 - Microsoft Access Error 10607

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Access Error 10607 - Code 10607

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 10607 (Microsoft Access-Fehler 10607) - Die Beziehung wurde als Eins-zu-Viele-Beziehung erstellt, da im zugehörigen Feld doppelte Einträge vorhanden sind.@Sie haben versucht, eine Eins-zu-Eins-Beziehung zu erstellen, aber die Daten in den Tabellen deuten darauf hin, dass eine Eins-zu-Eins-Beziehung -viele Beziehung ist angemessener
Come fissare Errore 10607 (Errore di Microsoft Access 10603) - La relazione è stata creata come relazione uno a molti perché ci sono voci duplicate nel campo correlato.@Hai provato a creare una relazione uno a uno, ma i dati nelle tabelle suggeriscono che una relazione uno a -molte relazioni sono più appropriate
Hoe maak je Fout 10607 (Microsoft Access-fout 10607) - De relatie is gemaakt als een een-op-veel-relatie omdat er dubbele vermeldingen in het gerelateerde veld staan.@U hebt geprobeerd een een-op-een-relatie te maken, maar de gegevens in de tabellen suggereren dat een een-op-een-relatie -veel relatie is meer geschikt
Comment réparer Erreur 10607 (Erreur d'accès Microsoft 10607) - La relation a été créée en tant que relation un-à-plusieurs car il existe des entrées en double dans le champ associé.@Vous avez essayé de créer une relation un-à-un, mais les données des tableaux suggèrent qu'une relation un-à-un -de nombreuses relations sont plus appropriées
어떻게 고치는 지 오류 10607 (Microsoft 액세스 오류 10607) - 관련 필드에 중복 항목이 있기 때문에 관계가 일대다 관계로 생성되었습니다.@일대일 관계를 생성하려고 시도했지만 테이블의 데이터에서 일대다 - 많은 관계가 더 적절하다
Como corrigir o Erro 10607 (Erro de Microsoft Access 10607) - O relacionamento foi criado como um relacionamento um para muitos porque há entradas duplicadas no campo relacionado. @ Você tentou criar um relacionamento um para um, mas os dados nas tabelas sugerem que um para - muitos relacionamentos são mais apropriados
Hur man åtgärdar Fel 10607 (Microsoft Access-fel 10607) - Relationen har skapats som en en-till-många-relation eftersom det finns dubblettposter i det relaterade fältet.@Du har försökt skapa en en-till-en-relation, men data i tabellerna tyder på att en en-till -många förhållanden är mer godkända
Как исправить Ошибка 10607 (Ошибка Microsoft Access 10607) - Отношение было создано как отношение «один-ко-многим», потому что в связанном поле есть повторяющиеся записи. @ Вы пытались создать отношение «один-к-одному», но данные в таблицах предполагают, что -многие отношения более подходящие
Jak naprawić Błąd 10607 (Błąd Microsoft Access 10607) - Relacja została utworzona jako relacja jeden-do-wielu, ponieważ istnieją zduplikowane wpisy w powiązanym polu.@Próbowałeś utworzyć relację jeden-do-jednego, ale dane w tabelach sugerują, że relacja jeden-do-jednego -wiele relacji jest bardziej odpowiednich
Cómo arreglar Error 10607 (Error de Microsoft Access 10607) - La relación se ha creado como una relación uno a varios porque hay entradas duplicadas en el campo relacionado. @ Ha intentado crear una relación uno a uno, pero los datos de las tablas sugieren que una relación uno a uno -Muchas relaciones son más apropiadas

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: