How to fix the Runtime Code 10014 Microsoft Office Access was unable to append all the data to the table

Symptoms of Code 10014 - Microsoft Office Access was unable to append all the data to the table

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Office Access was unable to append all the data to the table - Code 10014

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 10014 (Microsoft Office Access konnte nicht alle Daten an die Tabelle anhängen) - Microsoft Office Access konnte nicht alle Daten an die Tabelle anhängen.@Der Inhalt von Feldern in |1 Datensätzen wurde gelöscht und |2 Datensätze gingen aufgrund von Schlüsselverletzungen verloren.* Wenn Daten gelöscht wurden, Daten, die Sie eingefügt oder importiert haben, stimmen nicht mit dem Feld überein
Come fissare Errore 10014 (Microsoft Office Access non è stato in grado di aggiungere tutti i dati alla tabella) - Microsoft Office Access non è stato in grado di aggiungere tutti i dati alla tabella.@Il contenuto dei campi in |1 record è stato eliminato e |2 record sono stati persi a causa di violazioni della chiave.* Se i dati sono stati eliminati, il i dati che hai incollato o importato non corrispondono al campo da
Hoe maak je Fout 10014 (Microsoft Office Access kon niet alle gegevens aan de tabel toevoegen) - Microsoft Office Access kon niet alle gegevens aan de tabel toevoegen.@De inhoud van velden in |1 record(s) is verwijderd en |2 record(s) zijn verloren gegaan als gevolg van sleutelovertredingen.* Als gegevens werden verwijderd, gegevens die u hebt geplakt of geïmporteerd, komen niet overeen met het veld da
Comment réparer Erreur 10014 (Microsoft Office Access n'a pas pu ajouter toutes les données à la table) - Microsoft Office Access n'a pas pu ajouter toutes les données à la table.@Le contenu des champs de |1 enregistrement(s) a été supprimé et |2 enregistrement(s) ont été perdus en raison de violations de clé.* Si des données étaient supprimées, le les données que vous avez collées ou importées ne correspondent pas au champ da
어떻게 고치는 지 오류 10014 (Microsoft Office Access에서 모든 데이터를 테이블에 추가할 수 없습니다.) - Microsoft Office Access에서 모든 데이터를 테이블에 추가할 수 없습니다.@1 레코드의 필드 내용이 삭제되었고 |2 레코드가 키 위반으로 인해 손실되었습니다.* 데이터가 삭제된 경우 붙여넣거나 가져온 데이터가 필드 da와 일치하지 않습니다.
Como corrigir o Erro 10014 (O Microsoft Office Access não foi capaz de anexar todos os dados à tabela) - O Microsoft Office Access não conseguiu anexar todos os dados à tabela. @ O conteúdo dos campos em | 1 registro (s) foi excluído e | 2 registro (s) foram perdidos devido a violações de chave. * Se os dados foram excluídos, o os dados que você colou ou importou não correspondem ao campo da
Hur man åtgärdar Fel 10014 (Microsoft Office Access kunde inte lägga till alla data i tabellen) - Microsoft Office Access kunde inte lägga till all data i tabellen.@Innehållet i fält i | 1 post (er) raderades och | 2 poster (t) förlorades på grund av viktiga kränkningar.* Om data raderades data som du klistrade in eller importerade matchar inte fältet da
Как исправить Ошибка 10014 (Microsoft Office Access не смог добавить все данные в таблицу) - Microsoft Office Access не смог добавить все данные в таблицу. @ Содержимое полей в | 1 записи (ах) было удалено, а | 2 записи были потеряны из-за нарушения ключа. * Если данные были удалены, данные, которые вы вставили или импортировали, не соответствуют полю da
Jak naprawić Błąd 10014 (Microsoft Office Access nie mógł dołączyć wszystkich danych do tabeli) - Microsoft Office Access nie mógł dołączyć wszystkich danych do tabeli.@Zawartość pól w |1 rekordach została usunięta, a |2 rekordy zostały utracone z powodu naruszeń kluczowych.* Jeśli dane zostały usunięte, dane, które wkleiłeś lub zaimportowałeś nie pasują do pola da
Cómo arreglar Error 10014 (Microsoft Office Access no pudo agregar todos los datos a la tabla) - Microsoft Office Access no pudo agregar todos los datos a la tabla. @ Se eliminó el contenido de los campos en | 1 registro (s) y | 2 registros se perdieron debido a violaciones clave. * Si se eliminaron los datos, el los datos que pegaste o importaste no coinciden con el campo da

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: