How to fix the BSOD Error 0x6F SESSION3_INITIALIZATION_FAILED

Symptoms of Code 0x6F - SESSION3_INITIALIZATION_FAILED

BSODs are rather obvious, you just get a completely blue screen with a bunch of words and numbers telling you something caused the failure. It is a sudden and unexpected event which happens without warning.

Hardware related BSODs happen instantaneously when your hardware fails. The BSOD stays on the screen, and sometimes reboots in a loop without any possibilities of logging into the desktop.

Software related BSODs may or may not do the same, but they sometimes just appear a few minutes after booting up, allowing the user to get a glimpse of the error code.

Nevertheless, you are not entirely helpless when you receive a BSOD. You get an error code which you can use to identify the part of the computer which caused the failure.

(For illustrative purposes only)

Those that experience software related BSODs notice a difference in computer operation as the affected computer sometimes becomes sluggish when processing or suddenly shuts down. Users may also experience glitches and unless a different issue manifests at the same time you are getting the BSOD, you can say that it is a symptoms of BSOD.

Causes of SESSION3_INITIALIZATION_FAILED - Error 0x6F

BSODs are generally caused either by faulty hardware or software corruption. Hardware failure can be caused by overheating, power supply issues, incompatibilities or bad memory.

On the other hand, software related BSODs are results of timing inconsistency, driver incompatibility and operating system corruption. Not all software related BSODs stop you from accessing your desktop. When you receive an update that messes up your computer, you will experience processing failures at different instances while accessing your computer.

Repair Methods

Repairing BSODs can be a bit tricky, as they can be caused by many different reasons, but once you properly identify the problem, the steps are mostly straightforward. Here are known troubleshooting techniques you can try to help get rid of your Blue Screen error.

You should follow these four steps before attempting any repair method:

• Take note of the error code and other information that was displayed when you got the Blue Screen.
• Try to recall the last action you did on your computer before the error occurred.
• Remove peripherals that are not critical to normal operations.
• Reboot your computer to check if you can log into your desktop.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Check for Windows Updates

up vote 0 down vote

If you can log into your desktop normally or via Safe Mode, you should be able to access the Windows update tool and run it to get the latest available updates for your system. The troubleshooting process is a bit different for each version of the operating system, so follow the sections related to your operating system.
For Windows 7 Systems:

1. Open Windows Update by clicking the Start button.
2. Type Update in the search box, and click Windows Update.
3. This will open the Windows Update window and you'll be able to see Check for updates on the left panel, click it to check the latest updates for your computer.
4. If you see a message telling you that updates are available, or telling you to review updates, then select the relevant updates and click OK.
5. Click Install updates. You will be prompted to accept license, then just do that. Then it will require admin permission to make changes, just allow by either running as administrator or by keying in the password.

Windows 8:

1. Open Settings by either:
1. Holding down the Windows key on your keyboard beside the left Ctrl button, then pressing the X key, then choose Command prompt and type "wuauclt /showcheckforupdates" on the prompt. 1. Otherwise, you may also move your cursor to the right side of your screen so you may see the and then click the gear icon to open Settings. You will then see a new tab appear and at the bottom, you may click "Change PC Settings" to open a new window. There, you can click Windows update on the menu at the left side. It will open Windows update, where you can click the "Check for updates now" button. Run it by clicking the button and then, when it is done, click Install Updates and wait for the process to finish.
2. Reboot your computer to check if the error will still occur.

Windows 10:

1. You can update via Device Manager or by accessing computer Settings.
2. For the first method, type Device Manager on the Search box.
3. In reference with the error code you received, check for updates for the driver that is causing the issue by right clicking it and choosing Update Driver.
4. The second method would be to type Update on your Search box. Select Check for Updates download and install updates.
5. Once done, restart your computer to complete the update process.

Method 2 - Scan device performance and health

up vote 0 down vote

Another way to find faulty software programs or drivers is to scan your device performance and health. This utility is not a part of Windows Defender, however for earlier versions, you do the scanning in Device Manager since that is the only place in Windows 7 and 8 where you are provided a tool for scanning components. Here are the methods to run this tool.
For Windows 7, Vista and Windows 8:

• To scan devices would be to go to Device manager, right click Devices and select Scan for Hardware changes. This lets you check if your computer is having issues running a device with a certain driver.

For Windows 10:

• Open Windows Defender and click Device performance and health.
• Check for any listed issues with your updates, storage and drivers.
• If there are any issues detected, you can Repair Reinstall your Windows operating system so that you don't lose your files. You can repair reinstall your computer by either clicking Additional info under Fresh Start in Windows Defender and following the prompt or by using the OS CD and instead of doing a clean installation, by following the Repair my Computer option.

Method 3 - Run Windows Defender Offline

up vote 0 down vote

Since virus attacks can cause BSOD, removing them online can be very difficult. The best way to run a full scan to remove virus infection is to run it offline. Follow these steps to do that:
For Windows 7 and 8:

• You can run Windows Defender offline by creating a bootable disk or flash drive.
• You will need to download either the 32bit or 64bit version of Windows Defender offline. You'll be able to check which one you need by going to Start and right clicking on Computer, then open properties to see your Windows version.
• Once downloaded, you'll need to run either the msstool32.exe or msstool64.exe in order toto burn your cd or save on flash disk. Just remember that if you are using a flash disk, the creator tool will reformat your flash disk so any file on the disk will be lost.
• Place the media on the computer you need to scan and then reboot your computer. You might need to access your BIOS to change boot device, or you may just need to access your boot device menu to allow booting to the cd or flash drive.
• Once the process is done, you will need to reboot your computer normally. Check if you are still having the same issue.

For Windows 10:

• After receiving a BSOD, you may get a notification from Windows Defender you that your system may need additional cleaning. If that happens, you should perform and offline check of your computer to see if there are malware infections.
• Start by opening your computer Settings. Go to Security and open Windows Defender. You can run a full scan by clicking Scan Offline.

Method 4 - Uninstall recently installed software

up vote 0 down vote

You possiblymay have recently installed software that could be causing your computer to crash with a BSOD. In case you accidentally downloaded a file or program that caused harm to your computer, you may uninstall the problem program in any Windows version this way:

• Type Control Panel on the search box and click the result.
• Once inside control panel, click Uninstall a program.
• You will see on the Programs and Features window the list of all installed programs. Look for the ones that are installed just before you received the BSOD warning, right click the item and click Uninstall. Follow the direction to uninstall and then reboot your computer to see if the BSOD will come up again.

Method 5 - Unplug or uninstall external hardware

up vote 0 down vote

Computer peripherals are necessary for other purposes like printing, scanning, photo input, drawing, extending video and other activities.
When you connect a device to your computer, BSODs sometimes appear.

• When this happens, remove the external hardware first. Update your computer using the method we just tackled. Problems did not happen prior to connecting the device, so unplugging the device will help you get back to your desktop without problems.
• If you know that the device is in good condition, however, and you have tested it with a different device, you would want to keep using it. To make sure the BSOD doesn't happen again updates either your Microsoft software by running Windows Update or your device drivers by downloading from the manufacturer.
• Uninstalling and reinstalling the device driver may also work, so try going to Device Manager too. Uninstall the device and reboot your computer. This should install a fresh copy of your device driver when your computer restarts.

Method 6 - Toggle fast startup

up vote 0 down vote

You can perform this simple troubleshooting step in any Windows version in two different ways.
Method 1

• You can type Power Options on the search box, then press enter key.
• Click Choose what the power buttons do on the left side.
• Locate and change the status of Turn on fast startup under Shutdown settings. That is, turn it off if it is on, or turn it on if it is off, then click Save changes.

Method 2

• Type Command Prompt on search box. Run it on an elevated command line by right clicking and then choosing Run as administrator.
• Once inside Command Prompt, type powercfg -h off and then click enter. Exit to desktop and see if the problem persists.

Method 7 - Uninstall Recent Updates via Safe Mode

up vote 0 down vote

For Windows 7:

• Since BSOD that doesn't let you boot to Windows reboots in a cycle, you may try to interrupt the process by clicking F8. From the next screen, you will be able to log in using Safe Mode.
• Search for Windows Updates then click enter when it comes up on the search results. Check recent updates and click Uninstall updates on recent dates when the error began happening.

For Windows 8 and Windows 10

• Press the window key and the letter C simultaneously to open Settings.
• A slider tab will appear on the right side where you will see Settings on top and some icons at the bottom.
• Choose Power, click Shift together with Restart.
• This will allow you to boot to Windows repair items.
• Click troubleshoot then go to Advanced Options.
• Inside the next window, click Startup Settings. You will see a Restart button, just click it and it will boot you to advanced boot device where you can choose the boot utility.
• The choices are numbered so just click the number of the item that you wish to boot into.
• Once there, go to Windows update by searching for it. And do the same process of removing recently installed updates.

Method 8 - Run System Restore

up vote 0 down vote

You may repair your computer by restoring settings to an earlier date. There are several ways to do this.
Restore In Windows 7:

• Click Start and type System Restore on the search box, then click enter key.
• When the System Restore window appears, click Next until you get to the window where you can choose a restore point. You will see a list of restore dates with the description.
• Then click Next again and confirm restore process. Wait for it to stop processing and you get a window where you can click the Finish button. Close the window and let your computer reboot.

You may also restore your computer using the OS installation disk.

• To do that boot to OS CD or Recovery Media.
• Follow the prompt until you get to the screen where it gives you the option Repair My Computer, click and choose System Restore from the list of recovery tools.
• You can choose any restore point on the System Restore window, but make sure you restore to a date which you know your computer is working fine.
• Wait till the process finish and let your computer reboot to the Desktop.

You may also boot to Safe Mode.

• Boot your computer and click F8. Choose Safe Mode with Command Prompt by clicking the keyboard arrows to move the highlight down to that item.
• Once in Safe Mode, Type rstrui.exe and hit enter on command prompt. Follow the restore wizard and reboot your computer normally.

Restore in Windows 8:
Restore inside Windows environment

• While in Windows 8, Click the search icon and type System Restore.
• Keep clicking Next till you get to the window where you can select the restore date.
• Confirm restoration by following the remaining steps. After it is done, reboot your computer normally.

Restore at Boot

• Reboot your computer and tap F11 to start System Recovery
• You will see Advanced Options screen, and you will find System Restore in it.
• It will prompt you to choose the Administrator account, just choose and log into your admin account.
• Hit Next button until you get to the screen that allows you to choose restore dates.
• Keep pressing next button until you get to the end of the restore process and you see the Finish button.
• Reboot computer normally.

Restore in Windows 10:
Inside windows environment

• Run System Restore by typing it on the Search box. Click on the item that will come up on the search results.
• When System Restore window opens, click Next until you are given a list to choose restore date, choose the one that you know works best for you.
• Confirm the process by Next, then yes then finally Finish. Reboot your computer after closing the window.

Using the installation media

• If you cannot boot into windows, then you're better off downloading the Media Creator file from Microsoft. Create boot disk using a DVD or a flash disk.
• Once done, reboot your computer and access your BIOS to change boot device to either your DVD or your flash disk.
• When you get to the installation screen, go to Troubleshoot > Advanced Options > System Restore and perform the process the same way.

Other languages:

Wie beheben Fehler 0x6F (SESSION3_INITIALIZATION_FAILED) - Die Fehlerprüfung SESSION3_INITIALIZATION_FAILED hat den Wert 0x0000006F. Diese Fehlerprüfung zeigt an, dass die Initialisierung des Microsoft Windows-Betriebssystems fehlgeschlagen ist.
Come fissare Errore 0x6F (SESSION3_INITIALIZATION_FAILED) - Il controllo bug SESSION3_INITIALIZATION_FAILED ha un valore di 0x00000006F. Questo controllo bug indica che l'inizializzazione del sistema operativo Microsoft Windows non è riuscita.
Hoe maak je Fout 0x6F (SESSION3_INITIALIZATION_FAILED) - De SESSION3_INITIALIZATION_FAILED bugcontrole heeft een waarde van 0x0000006F. Deze bugcontrole geeft aan dat de initialisatie van het Microsoft Windows-besturingssysteem is mislukt.
Comment réparer Erreur 0x6F (SESSION3_INITIALISATION_ÉCHEC) - La vérification de bogue SESSION3_INITIALIZATION_FAILED a une valeur de 0x00000006F. Cette vérification de bogue indique que l'initialisation du système d'exploitation Microsoft Windows a échoué.
어떻게 고치는 지 오류 0x6F (SESSION3_INITIALIZATION_FAILED) - SESSION3_INITIALIZATION_FAILED 버그 검사의 값은 0x0000006F입니다. 이 버그 검사는 Microsoft Windows 운영 체제의 초기화가 실패했음을 나타냅니다.
Como corrigir o Erro 0x6F (SESSION3_INITIALIZATION_FAILED) - A verificação de bug SESSION3_INITIALIZATION_FAILED tem um valor de 0x0000006F. Esta verificação de bug indica que a inicialização do sistema operacional Microsoft Windows falhou.
Hur man åtgärdar Fel 0x6F (SESSION3_INITIALIZATION_FAILED) - Felkontrollen SESSION3_INITIALIZATION_FAILED har ett värde på 0x0000006F. Denna buggkontroll indikerar att initialiseringen av Microsoft Windows -operativsystemet misslyckades.
Как исправить Ошибка 0x6F (SESSION3_INITIALIZATION_FAILED) - Проверка ошибок SESSION3_INITIALIZATION_FAILED имеет значение 0x0000006F. Эта проверка на ошибку указывает на то, что инициализация операционной системы Microsoft Windows не удалась.
Jak naprawić Błąd 0x6F (SESSION3_INITIALIZATION_FAILED) - Sprawdzanie błędów SESSION3_INITIALIZATION_FAILED ma wartość 0x0000006F. To sprawdzenie błędów wskazuje, że inicjalizacja systemu operacyjnego Microsoft Windows nie powiodła się.
Cómo arreglar Error 0x6F (SESSION3_INITIALIZATION_FAILED) - La comprobación de errores SESSION3_INITIALIZATION_FAILED tiene un valor de 0x0000006F. Esta comprobación de errores indica que la inicialización del sistema operativo Microsoft Windows falló.

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: